SNMP SERVER CONFIGURATION ON CISCO SWITCH. SNMP (Simple Network Management Protocol) is a protocol used to manage and monitor network devices, including switches, routers, servers, and printers. SNMP allows network administrators to collect valuable data, such as network traffic statistics, device uptime, and CPU utilization, from network devices. In this article, we will discuss how to configure SNMP on a Cisco switch.Step 1: Enable SNMP on the Cisco Switch The first step is to enable SNMP on the Cisco switch. This is done by entering the global configuration mode and issuing the following command:

switch# configure terminal
switch(config)# snmp-server

This command enables SNMP on the switch and puts the switch in SNMP configuration mode.

Step 2: Set the SNMP Community String SNMP uses a community string to authenticate and authorize SNMP queries. The community string is similar to a password and must be kept secure. To set the community string, enter the following command:

switch(config)# snmp-server community <community_string> ro

Replace <community_string> with the community string you want to use. The “ro” at the end of the command specifies that the community string is read-only. If you want to allow write access, you can use the “rw” option instead.

Step 3: Configure SNMP Traps SNMP traps are alerts sent by network devices to an SNMP management system when certain events occur, such as a link going down or a device overheating. To configure SNMP traps, enter the following commands:

SNMP SERVER CONFIGURATION ON CISCO SWITCH

switch(config)# snmp-server host <IP_address> <community_string>
switch(config)# snmp-server enable traps

Replace <IP_address> with the IP address of the SNMP management system and <community_string> with the community string you set earlier.

Step 4: Verify SNMP Configuration To verify that SNMP is configured correctly, use the following commands:

switch# show snmp
switch# show snmp community
switch# show snmp trap

These commands display the current SNMP configuration, including the community string and SNMP trap settings.

Conclusion SNMP is a powerful tool for managing and monitoring network devices, including Cisco switches. By following the steps outlined in this article, you can configure SNMP on a Cisco switch and start collecting valuable data about your network. Remember to keep your community string secure and to configure SNMP traps to receive alerts when important events occur.

if you want to know more information about computer networking so you can bookmark my site. and you need any kind of help about networking you may also mail us pollybd.com@gmail.com

HOME