BDCOM SWITCH FIRMWARE UPGRADATION STEP BY STEP

BDCOM SWITCH FIRMWARE UPGRADATION STEP BY STEP, #Download BDCOM switch latest firmware: DOWNLOAD

And rename it: Switch.bin

#Connect the switch via telnet or console cable to see switch firmware version by below command

#Then go to switch privilege mode

2.enable

#At first you have add ip address to your laptop or desktop

192.168.1.2

255.255.255.0

#Then you have to add ip address in Switch same ip block follow below command.

#Then you have to download TFTP server follow the link

#Copy firmware file from tftp server:

6.SW_config#copy flash tftp 192.168.1.2

Source file name? Switch.bin

Destination file name? Switch.bin

And you have to reboot the device in order to run from the new version

7.SW_config#Reboot

NB: Check ping response from switch tftp server ip address

PollyBD Networking Blogspot