Tuesday , 11 August 2020
Home » OLT » Set Manual Authentication In ONU | BDCOM OLT

Set Manual Authentication In ONU | BDCOM OLT

#epon onu-authen-method manual – For onu  authenticate on olt & you need to authenticate the register onu manually in global configuration mode 

Example: 

**onu is registered in normal mode**

OLT1>

OLT1>ena

OLT1#show epon onu-information

Interface EPON0/2 has registered 1 ONUs:

IntfName    VendorID ModelID    MAC Address Description                     BindType Status Dereg Reason

———– ——— ———- ————– ——————————- ——— ————— ————–

EPON0/2:8                 e067.b38d.2497 N/A         dynamic   registered  N/A 

** onu authenticate manually registered in global mode**

OLT1#epon conform-onu interface epon 0/2:8

Are you sure to conform the ONU(y/n)?y

OLT1#Jun  2 07:21:59 %EPON-ONUAUTHEN: ONU e067.b38d.2497 is authenticated on EPON0/2:8.

OLT1#show epon onu-information

Interface EPON0/2 has registered 1 ONUs:

IntfName   VendorID ModelID  MAC Address Description BindType  Status  

    Dereg Reason    

———- ——— ——– ————– ————— ———

EPON0/2:8  JZ 3024 e067.b38d.2497 N/A         static auto_conf igured N/A

Check Also

By Default All User Connect Automatically If Need We Change VLAN In BDCOM OLT

By Default All User Connect Automatically If Need We Change VLAN In BDCOM OLT

By Default All User Connect Automatically If Need We Change VLAN In BDCOM OLT By …

Leave a Reply

Your email address will not be published. Required fields are marked *

Translate »