Friday , 3 February 2023
Home » OLT » HOW TO ACTIVATE 10G PORT IN VSOL OLT

HOW TO ACTIVATE 10G PORT IN VSOL OLT

HOW TO ACTIVATE 10G PORT IN VSOL OLT

Today we will learn how to activate/enable 10g port in vsol olt.

vsol olt is usually 10g port by default as 1g port. So let us learn the command.

First you need to login to vsol olt. You will login to olt by putting console.
Then you give this command OLT> enable. This will put you in “#” mode.
Then you need to use the configure terminal command.
ex: OLT# configure terminal
Now you need to enter debug mode of olt.
For this you need to use OLT(config)# debug mode command.
Then you need to use a set command to change the port from 1g to 10g.
OLT(debug-mode)# set giu mode sfp+
Type this command and hit enter.
And our work is done now you have to exit with exit command and enter write command.
ex: OLT(debug-mode)# exit
OLT(config)# write
Your work is now saved.

OLT>enable

OLT#config terminal

OLT(config)#debug mode

OLT(debug-mode)#set giu mode sfp+

OLT(debug-mode)#exit

OLT(config)#write

Your 10g port will now work as a 10g port.

You can visit my network tools site. pingicu.com

Have any question you can comment or mail me pollybd.com@gmail.com

HOME

Check Also

কিভাবে BDCOM OLT তে MAC দিয়ে সার্চ করে onu খুঁজে বের করবেন

কিভাবে BDCOM OLT তে MAC দিয়ে সার্চ করে onu খুঁজে বের করবেন কিভাবে BDCOM OLT …

Leave a Reply

Your email address will not be published. Required fields are marked *

Translate »